Tag: Tachometer

AutoMeter Products: Mopar Classic Gauges

John Arnaud Leave a comment
Use This Post Clip for Email

Officially licensed Mopar Classic gauges from AutoMeter help you protect your investment by providing accurate, reliable, track-tested, and race-proven information about what’s going on under the hood. These gauges are finished with chrome bezels and easy-to-read black dials featuring fluorescent red needles; aircraft-inspired incandescent perimeter illumination; and the red, white, and blue Mopar heritage logo.

AutoMeter has Mopar Classic gauges available to measure fuel level, oil pressure, water temperature, and volts in 2-1/16” diameter sizes; at 3-3/8”, you can get a programmable speedometer and in-dash or pedestal-mounted tachs.

Features

  • Fuel level, oil pressure, water temperature, and volt gauges in 2-1/16” diameter.
  • Programmable speedometer and in-dash or pedestal-mounted tachs in 3-3/8” diameter.
  • Oil pressure and water temp gauges include Mopar-appropriate sensors and brass adapter fittings.
  • Red and green bulb covers offer a pleasant low-light experience.
AutoMeter Mopar Classic Gauges

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

AutoMeter: 3-1/8” Pedestal Mounting Cups

John Arnaud Leave a comment
Use This Post Clip for Email

The new 3-1/8” mounting cups from AutoMeter answer the challenge of finding the perfect place to mount your AutoMeter tach or speedo (22 models currently available). This product can be mounted inside or outside of the cabin, on top of or under the dash. A great choice for AutoMeter’s “Street Rod” series gauges (e.g., Arctic White, Designer Black, Old Tyme White/Black, Antique Beige, etc.)

Available in Chrome (2153) or Black (2154); includes mounting strap, black base, hardware, and instructions.

Features

  • Universal mounting for AutoMeter 3-1/8” tachometers or electric speedometers.
  • Can be mounted inside or out, on or under the dash.
  • Includes mounting hardware and installation instructions.
  • Available in Chrome or Black.

AutoMeter Pedestal Mounting Cups

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Auto Meter: Direct-Fit American Muscle Dash Kits

John Arnaud Leave a comment
Use This Post Clip for Email

Upgrade your classic 60s, 70s, or early-80s muscle car or truck with an Auto Meter Direct-Fit American Muscle Dash Kit. Each easy-to-install kit includes a durable replacement dash panel, six iconic American Muscle gauges, a universal wiring harness, sending units, LED lighting dimmer, and all necessary mounting hardware. LED through-dial lighting ensures optimal visibility during low-light conditions while Auto Meter‘s easy, no-fab installation allows you to preserve the original interior of your classic ride.

More than a dozen models are available, including those for Camaro, Firebird, Nova, Chevelle, El Camino, Monte Carlo, Malibu, Challenger, Suburban, GM E-body and A-body, and more!

Features

 Simplicity: Takes the guesswork out of deciding what gauges to use—included pieces satisfy functionality and nostalgia.

  • Clean installation: Uses factory mounting locations and hardware—no cutting, drilling, or dash modification required.
  • Precision-molded, durable, and UV-protected ABS plastic replacement dash panel.
  • Six all-electric American Muscle gauges: tachometer, speedometer, water temperature, oil pressure, voltmeter, and OE-specific fuel level.
  • Universal 6-gauge wiring harness.
  • All necessary sending units and mounting hardware.
  • LED dimmer and installation instructions.
  • Made in the USA!

Husky Liners: KickBack Mud Flaps for Lifted Trucks
Husky Liners: KickBack Mud Flaps for Lifted Trucks

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Painless Performance (60650): LS Gauge Controller

John Arnaud Leave a comment
Use This Post Clip for Email

If you’re running a modern LSx drivetrain in an older vehicle, you’ve probably wondered how you’re going to integrate all of your aftermarket gauges. Until now, your only option was to purchase individual sensors and install them just to run the gauges—even though your modern LSx drivetrain already has the necessary sensors integrated into its computer control system. If running redundant sensors seems a bit, well, redundant, the LS Gauge Controller from Painless Performance is just the product you need.

This module uses the information that is already available through your OBD-II port, eliminating the need to run duplicate sensors for your various gauge functions. You’ll be able to use most aftermarket speedometer, tachometer, coolant temperature, oil pressure*, and fuel level* gauges thanks to an advanced data-conversion process. The 60650 LS Gauge Controller is compatible with all GM gas engine drivetrains from 1996. Not currently compatible with GMPP engine harness kits.

  • Eliminates the need for redundant gauge sensors.
  • Uses Control Area Network (CAN) system to convert raw data into a user-programmable signal.
  • Compatible with 1996-and-up GM gas engine drivetrains.
  • Supports all speedometer, tachometer, and coolant temp gauges.
  • Select applications will support oil pressure and fuel level gauges.
  • Made in the USA.

*Not available for all applications.

Painless Performance (60650): LS Gauge Controller
Painless Performance (60650): LS Gauge Controller

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Auto Meter (6896): 5″ Ultimate DL 9,000 RPM Tach

John Arnaud Leave a comment
Use This Post Clip for Email

The Ultimate DL not only records engine RPM, but also driveshaft RPM, wideband air/fuel ratio, a user-definable pressure channel, and three G meters to show exactly how the vehicle is moving down the track.

Since 1957, Auto Meter has set the standard in performance, accuracy, and durability with its legendary tachometers. With such advanced design, Auto Meter can lay claim to more motorsports victories than every other gauge manufacturer combined. The patented air-core meter movement, wound in-house to exacting standards, can move the needle from 0 to 10,000 RPM in 333 milliseconds. An ultra-bright LED shift light guarantees you hit your shifts perfectly, every time. An inaugural inductee to the Hot Rod Speed Parts Hall of Fame, this tach has no peer when it comes to influence and impact on professional racing. Built for a lifetime of service under the harshest conditions, this is the no-compromise tach for no-compromise builds. When you’re ready for the best, there isn’t another choice.

Auto Meter 6896
Auto Meter 6896

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.