Flowmaster (817760): Outlaw Cat-Back Exhaust System with Moderate/Aggressive Sound

Designed for Dodge applications with the factory Active Exhaust option, the 817760 Outlaw cat-back exhaust system from Flowmaster provides an aggressive, wide-open exterior sound level when hard on the gas and a moderate exterior/interior sound while cruising. This bolt-on 409S stainless steel system features a dual 3.00” Scavenger X-pipe assembly that runs into a pair of specially built Super 40 Series mufflers, uses 3.00” mandrel-bent tailpipes with built-in active exhaust valves, and is finished off with 3.50” quad stainless steel embossed tips. Designed for an easy fit, this system includes all necessary parts and hardware for installation. Made in the USA!

Fits: 2015–2017 Dodge Challenger SRT 392 and R/T Scat Pack with 6.4L engine and SRT Hellcat with 6.2L engine.

Features

  • For factory Active Exhaust option.
  • Dyno-tuned for maximum performance.
  • Stainless steel construction.
  • Made in America.

Flowmaster Outlaw Cat Back Exhaust 817760

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Hurst (6350029): Dual-Mode Axle-Back Exhaust for ’16-’17 Camaro SS 6.2L with NPP Quad Tip

This new Elite Series axle-back exhaust system for the 2016–2017 Camaro SS with 6.2L V8 from Hurst gives you real sound options: either powerful, aggressive sound in Track mode or a mellow tone in Stealth mode. It’s specifically engineered to fit both coupe and convertible models with the factory NPP option (identified by quad tips) and features tandem Delta 40 and Outlaw mufflers and 4” polished stainless steel tips.

Made in America from 409S stainless steel, the Hurst 6350029 includes all necessary parts and installation hardware.

Note: Though the system itself clamps on, the OE system will require cutting to remove the factory mufflers.

Features

  • For 2016–2017 Chevy Camaro SS 6.2L V8 with NPP quad tips.
  • Dual-mode operation: Track and Stealth.
  • Functional exhaust valves work with OE actuator motors to select between sound levels.
  • Stainless steel construction.
  • Dyno tuned for maximum performance.
  • Made in the USA.

Hurst Dual-Mode Axle-Back Exhaust for Camaro 6350029

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Hooker (70401319-RHKR): Blackheart Axle-Back Dual Transverse Dual Mode Exhaust for ’16 Camaro 6.2L

Based on the platform-designed Blackheart line—engineered to provide maximum exhaust velocity, ground clearance, style, performance, and quality—is Hooker’s new Axle-Back Dual Transverse Dual Mode Exhaust System with Quad Tips for manual 2016 Chevy Camaro SS with 6.2L V8. It offers max dyno gains of +15.88 hp and 17.71 ft.-lb. torque by eliminating the restrictive factory mid-pipe where the exhaust tube is crushed.

70401319-RHKR uses dual polished 304 stainless steel, high-flow, straight-through transverse mufflers and exhaust valves that provide a pleasant driving experience at cruising speeds when closed and an aggressive, race-inspired tone when open. The system uses factory mounting points for ease of installation, while 4” dual-wall, angle-cut, polished stainless steel quad tips with laser-etched Hooker Blackheart logo offer unmatched styling.

Features

  • Fits manual 2016 Chevrolet Camaro SS V8 6.2L
  • Dyno gains of +15.88 hp and 17.7 ft.-lb. torque
  • Mandrel-bent 18-gauge polished stainless steel
  • Dual high-flow, straight-through transverse mufflers
  • 4” dual-wall, angle-cut quad tips
  • Built-in exhaust values emit different tones when open and closed
  • Eliminates restrictive factory mid-pipe
  • Quality welds for strength, longevity, and good looks
  • Uses factory mounting points for ease of installation and ground clearance
  • Backed by Hooker’s lifetime limited warranty
Hooker (70401319-RHKR): Blackheart Axle-Back Dual Transverse Dual Mode Exhaust for ’16 Camaro 6.2L
Hooker (70401319-RHKR): Blackheart Axle-Back Dual Transverse Dual Mode Exhaust for ’16 Camaro 6.2L

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Flowmaster (817745): Axel-Back Exhaust System for ’16 Camaro SS

The Outlaw Axle-Back Exhaust System provides an aggressive exhaust tone both inside and outside your 2016 Chevrolet Camaro SS coupe or convertible—with all the performance gains you expect from the experts at Flowmaster. This bolt-on, emissions-legal system for the 6.2L V8 features a pair of 409S stainless steel Outlaw Series mufflers with 3” stainless steel mandrel-bent pipes.

The 817745 sports benefits such as improved throttle response, mileage, and power. Finished off by 4” polished-black, PVD-coated stainless steel tips, this Chevy exhaust system is manufactured in the USA, is covered by Flowmaster’s Lifetime Limited Warranty, and includes all the parts and hardware required for installation.

Note: Automatic transmission models include active exhaust valves that operate while in MDS mode. These valves are retained with this system. Does not fit models with the Performance Exhaust Option

  • Fits 2016 Chevrolet Camaro SS couple or convertible models.
  • Bolt-on installation.
  • Emissions legal.
  • Dyno-tuned, race-proven technology.
  • Produces a very aggressive interior and exterior tone.
  • 3” mandrel-bent stainless steel pipes and 4” black tips.
  • Made in America and backed by Flowmaster’s Limited Lifetime Warranty.
Flowmaster (817745): Axel-Back Exhaust System for ’16 Camaro SS
Flowmaster (817745): Axel-Back Exhaust System for ’16 Camaro SS

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette

Constructed from 3” 18-gauge stainless steel, the BlackHeart Cat-Back Exhaust with Dual Mode Mufflers NPP for 2014–2015 C7 Corvette from Hooker produces a mellow, throaty tone when the valve is closed and aggressive race attitude when the value is open. Notably, this product boasts a huge 3” bypass valve that uses the factory NPP actuator, as well as a Siamese X-pipe with increased scavenging for maximum performance gains. The system retains all factory catalytic converters (some cutting is required).

Quality welds ensure strength, longevity, and good looks—especially in combination with the 4” twin-wall polished stainless tips with laser-etched Hooker logo. The 70501349-RHKR system uses factory mounting points to facilitate installation, while Hooker’s advanced tube geometry allows for straight-through performance and maximum ground clearance. All hardware is included.

  • Fits ’14–’15 C7 Corvette.
  • 3” 18-gauge stainless steel construction.
  • 4” twin-wall polished tips.
  • Straight-through, high-flow performance.
  • 3” bypass valve utilizes factory NPP actuator.
  • Retains all factory catalytic converters (cutting required).
  • Siamese X-pipe for increased scavenging.
  • Factory-style 3” AFM valves prevent check engine light engagement and reduce unwanted harmonics while in 4-cylinder mode.
  • Installation via factory mounting points.
  • Optimal tube geometry.
  • Quality welds.
Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette
Hooker: (70501349-RHKR): BlackHeart Cat-Back with Dual Mode Mufflers NPP for C7 Corvette

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

Constructed from 2.5” lightweight, 18-gauge stainless steel, the Cat-Back Exhaust System with Mufflers for 2010–2015 Chevy Camaro SS with 6.2L engine from Flowtech produces an aggressive exhaust note under acceleration and a mellow tone at idle. Quality welds ensure strength, longevity, and good looks—especially in combination with the 4” dual-wall polished stainless tips.

The 51601FLT system uses factory mounting points to facilitate installation, while Flowtech’s advanced tube geometry allows for straight-through performance and maximum ground clearance.

  • 5” 18-gauge stainless steel construction.
  • 4” dual-wall polished tips.
  • Straight-through, high-flow performance.
  • Installation via factory mounting points.
  • Optimal tube geometry.
  • Quality welds.
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L
Flowtech (51601FLT): 2.5” Cat-Back Exhaust System with Mufflers for ’10–’15 Camaro SS 6.2L

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Flowtech (31138FLT): Ceramic Shorty Headers for 10-14 Chevy Camaro V8-6.2L

Flowtech headers offer the perfect combination of quality and value. These shorty headers fit the popular 2010–2014 Chevy Camaro with V8 6.2L engine and are a must if you’re using a cold air intake, cat-back exhaust system, or a tuner. With their silver-metallic ceramic coating, these 16-gauge headers offer increased strength and durability in addition to smooth flow and increased exhaust velocity. CARB E.O. pending!

  • Mandrel-bent tubes let your system breathe for increased power.
  • Smooth transition, 1-3/4” diameter primary tubes.
  • Unique-cast 2-1/2” collector for maximum strength.
  • TIG-welded, machined 3/8” header flange for a strong, leak-free seal.
  • Designed for a hassle-free installation; accommodate all factory OE components.
  • Premium aluminum header gaskets included.
  • Silver metallic ceramic coating.
Flowtech (31138FLT): Ceramic Shorty Headers for 10-14 Chevy Camaro V8-6.2L
Flowtech (31138FLT): Ceramic Shorty Headers for 10-14 Chevy Camaro V8-6.2L

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

DEI: EXO Series Exhaust and Pipe Wrap

The Design Engineering, Inc. EXO Series™ exhaust wrap is designed for use in extreme environments. Traditional exhaust wraps have not been able to withstand the dirt and water that can accompany off-road, dirt track, desert, and other forms of intense driving. The EXO Series features a dual-layer design that incorporates a combination of high-temperature glass covered with a 304-grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact shielding. What’s more, DEI’s unique Air Gap Technology keeps the glass fiber wrap from directly contacting the hot surface by way of an insulating air barrier.

The EXO Series exhaust wrap comes in a special 1.5” width, making it easy to install on any type of header, exhaust pipe, or exhaust system; this size also makes it perfect for high-impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped, keeping the wrap tight and making installation easy. Delivering outstanding looks and rugged performance over the long haul, this product is available in Black or Tan in either 1.5” x 10’ or 1.5” x 20’ rolls.

EXO Series Exhaust Wrap
EXO Series Exhaust Wrap

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Flowmaster (817749): American Thunder Axle-Back Kit for 2015-2016 Ford Mustang

Flowmaster’s American Thunder axle-back exhaust system for the 2015-2016 Ford Mustang GT is perfect for the person looking for an aggressive sound level both inside and outside of the car, with all of the performance benefits that you would expect from Flowmaster. This bolt-on DOR (Dual Out Rear), emissions-legal system for cars with a 5.0L engine features a pair of Super 44 Series mufflers and dual mandrel-bent 3″ tailpipes for maximum performance. The system is built out of 409S stainless steel and uses 4″ stainless steel tips. The exhaust system is manufactured in the USA and is covered by Flowmaster’s Lifetime Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for installation. Note: This system fits hardtops and convertibles.

Features:

  • Stainless steel construction
  • Dyno tuned for maximum performance
  • Patented Delta Flow Technology

    Flowmaster 817749
    Flowmaster 817749

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.

Hurst (6350010): Elite Series Cat-Back Exhaust System for 2008-2014 Dodge Challenger SRT8

Hurst’s new Elite Series cat-back exhaust system for the 2008-2014 Dodge Challenger SRT8 with 6.1L or 6.4L V8 is constructed using the highest-quality materials and finest craftsmanship available today. Hurst Elite Series systems feature fully mandrel-bent 304s stainless steel tubing that has been custom-designed and exclusively manufactured by Flowmaster to ensure a precise fit every time! Hurst engineers then added an X-pipe crossover, which provides maximum scavenging, sound, and performance, and paired it with a set of fully polished 304s stainless steel Hurst mufflers. The mufflers use a high-thermal sound-absorption barrier with a large 3″ straight-through performance core that provides a deep, classic tone reminiscent of Hurst’s iconic heritage. The quad 3.5″ mirror-polished stainless steel tips, featuring laser-etched Hurst logos, finish off the system and put the world on notice that you’re serious about performance and style. Every Hurst Elite Series cat-back exhaust system is hand fabricated in the USA and backed by a Lifetime Limited Warranty.

Hurst_6350010
Hurst_6350010

Ready to buy? Need help with the install? To find your nearest Performance Corner® affiliate, see our Store Locator. Or join the conversation at the Performance Corner® Facebook page!

Though this is not a paid review, this content has been produced by The AAM Group in support of suppliers with whom it has a business relationship.