DEI: EXO Series Exhaust and Pipe Wrap

The Design Engineering, Inc. EXO Series™ exhaust wrap is designed for use in extreme environments. Traditional exhaust wraps have not been able to withstand the dirt and water that can accompany off-road, dirt track, desert, and other forms of intense driving. The EXO Series features a dual-layer design that incorporates a combination of high-temperature glass covered with a 304-grade stainless steel exoskeleton. This unique construction maintains high heat protection while offering superior abrasion and impact shielding. What’s more, DEI’s unique Air Gap Technology keeps the glass fiber wrap from directly contacting the hot surface by way of an insulating air barrier.

The EXO Series exhaust wrap comes in a special 1.5” width, making it easy to install on any type of header, exhaust pipe, or exhaust system; this size also makes it perfect for high-impact spot protection. In addition, the stainless steel exoskeleton locks together when overlapped, keeping the wrap tight and making installation easy. Delivering outstanding looks and rugged performance over the long haul, this product is available in Black or Tan in either 1.5” x 10’ or 1.5” x 20’ rolls.

EXO Series Exhaust Wrap
EXO Series Exhaust Wrap

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Edge Products (98618): EAS Data-Logging Kit

The EAS (Expandable Accessory System) allows you to connect and display multiple accessory sensors, daisy-chain style, to customize the CS2/CTS2 to your specific vehicle and needs. Don’t add clunky gauges when you can have the clean look of dozens of display parameters on a single device using Edge’s EAS.

Edge Products’ 98618 EAS Data-Logging Kit is for the ultimate diesel enthusiast! This kit gives users the ability to monitor EGTs in two different locations, two 0-100 PSIg boost sensors, and two -40F to 300F temp sensors for unmatched monitoring.  This kit is designed for truck owners who have upgraded turbos and other mods where the stock sensors just aren’t enough anymore. Truck owners who use trucks for dyno competitions, sled pulls, and drag racing need this kit. Fine tuning these trucks can be difficult, but with the Edge EAS Data-Logging Kit you can log runs, view logs, and make adjustments as needed for maximum performance.

Includes:

  • EAS Starter Kit
  • Two EAS EGT Probes
  • Two EAS Universal 5 Volts
  • Two EAS 0-100 PSIg Pressure Sensors
  • Two EAS -40F to 300F Temperature Sensors

    Edge Products 98618
    Edge Products 98618

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

UnderCover: Flex Now Available for 2016 Toyota Tacoma

The UnderCover Flex is now available for the all-new 2016 Toyota Tacoma, with models for both the 5′ bed (FX41014) and the 6′ bed (FX41015). The UnderCover Flex is a hard folding tonneau cover that gives you ultimate control of your truck bed with three secure riding positions. The cover is easy to remove, requires no drilling for installation, and mounts flush with your truck’s bed rails–making it the most water-tight hard folding cover on the market. Each panel is made from quality FRP composite material, which is lighter, stronger, and more dent resistant than aluminum. Each Flex has a bed rail mounting system equipped with rubber seals and drain tubes that carry water away from and out of the bed, keeping your gear dry and secure. Best yet, Flex is backed by a 3-year warranty.

UnderCover Flex  2016 Toyota Tacoma
UnderCover Flex 2016 Toyota Tacoma

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Hurst (1630225): Classic Shift Knob for 2015-2016 Ford Mustang

Hurst’s new classic shift knob for 2015-2016 model Mustangs with manual transmission is a great way to add some classic muscle car appeal to your modern muscle car.  The 2.25″ white-ball knob features a 6-speed shift pattern and the Hurst logo engraved on the sides. The bottom of the knob features a large pocket recess to accommodate the factory reverse lockout button. This product is backed by a Lifetime Limited Warranty and is made in the USA.

  • 6-speed engraved shift pattern
  • Iconic Hurst logo
  • High-gloss finish
  • High-strength plastic
  • Made in the USA

    Hurst 1630225
    Hurst 1630225

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Race Sport: GEN4 HID Solve-All Solution CANBUS Conversion Kits

Race Sport GEN4 HID Solve-All Solution CANBUS Conversion Kits feature:

  • 3-year warranty.
  • Slim, weatherproof design.
  • Error light and RF interference prevention circuitry.
  • High-quality igniter system.
  • 35-watt ballast power.
  • Oriented for CANBUS vehicles model year 2005 and newer.
  • Kit includes: two 35-watt CANBUS ballasts and HID bulbs, hardware, and instructions.
  • Bi-xenon kits include high/low control pack harness.

    Gen 4 HID Conversion Kit
    GEN4 HID Conversion Kit

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

AVS: Aeroskin II Textured Matte Black Hood Shield

AVS has released an all-new lineup of hood shields for a variety of vehicles. The Aeroskin II is the latest product that keeps AVS “Ahead of the Curve.” The Aeroskin II is designed to flow with the contours of your vehicle’s hood, providing the ultimate protection from road hazards. Custom-molded and made in the USA, AVS’s Aeroskin II is precision engineered to perfectly fit your vehicle’s hood.

Features:

  • Custom style that protects your vehicle’s hood
  • Made from a impact-resistant TPO material
  • Installs without drilling using 3M automotive-grade adhesive
  • OEM matte black textured finish
  • Backed by a limited lifetime warranty
  • Made in the USA
  • Available for Ford, Chevrolet, GMC, Dodge, and Toyota

    AVS Aeroskin II 436011
    AVS Aeroskin II 436011

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Flowmaster (817749): American Thunder Axle-Back Kit for 2015-2016 Ford Mustang

Flowmaster’s American Thunder axle-back exhaust system for the 2015-2016 Ford Mustang GT is perfect for the person looking for an aggressive sound level both inside and outside of the car, with all of the performance benefits that you would expect from Flowmaster. This bolt-on DOR (Dual Out Rear), emissions-legal system for cars with a 5.0L engine features a pair of Super 44 Series mufflers and dual mandrel-bent 3″ tailpipes for maximum performance. The system is built out of 409S stainless steel and uses 4″ stainless steel tips. The exhaust system is manufactured in the USA and is covered by Flowmaster’s Lifetime Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for installation. Note: This system fits hardtops and convertibles.

Features:

  • Stainless steel construction
  • Dyno tuned for maximum performance
  • Patented Delta Flow Technology

    Flowmaster 817749
    Flowmaster 817749

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

MSD (2700): Atomic AirForce Manifold for 2014-2015 Chevrolet Corvette LT1

If you’re looking for bolt-on power and torque for your new LT1, the new Atomic AirForce intake manifold from MSD is the answer! This all-new polymer intake will increase the performance of stock and modified versions of the Direct-Injected LT1 engine.

MSD initiated the clean-sheet AirForce design by addressing the performance shortcomings of the OEM manifold. Through the use of Computational Fluid Dynamic modeling, MSD was able to optimize the plenum volume and improve runner layout. Unique bell-mouthed runner openings, optimum runner length, and minimal shrouding ensure maximum airflow and cylinder-to-cylinder balance.

The LT1 intake is a two-piece molded design that allows for porting and runner modification, while the polymer construction minimizes weight and heat absorption. MSD also made it easy to accommodate power adders by equipping the AirForce LT1 manifold with integral port fuel injection bosses at the base of each runner.

The AirForce LT1 intake accepts an OEM electronic throttle body as well as aftermarket electronic throttles up to 105 mm.

MSD Atomic 2700
MSD Atomic 2700

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

K&N (71-2545): Blackhawk Induction Air Intake System

The K&N 71-2545 Blackhawk Induction Air Intake System for the 2011-2016 Challenger/Charger/300 6.4L is a free-flowing, mandrel-bent aluminum tube air intake system that is guaranteed to gain power. It replaces your vehicle’s restrictive factory air filter and air intake housing. This low-restriction system allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more power and acceleration. This product comes with black components including a K&N high-flow air filter and heat shield. The tube features an attractive, textured, black powder-coated finish and an engraved K&N plate welded on–creating a clean, high-performance look under the hood. The intake tube accommodates the factory air temperature sensor and crank case vent hose. The oversized cone-shaped air filter is made from an oil-free synthetic filter medium that can be used for up to 100,000 miles before cleaning is needed, depending on driving conditions. This air intake is relatively easy to install, usually only 90 minutes or less using existing factory mounting points and commonly available tools.

Note: Cannot be sold in California and not legal for use in California or other states adopting California emission standards.

K&N 71-2545
K&N 71-2545

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.

Putco: DayLiner SwitchBack LED Accent Lighting

Putco’s SwitchBack LED DayLiners feature high-power COB (chip on board) LEDs embedded into CNC-trimmed aluminum for an attractive accent day or night. Plus, they features Putco’s new channel light style!

Using your vehicle’s daytime running light and turn signal switches, SwitchBack DayLiners are application specific and affix to your headlamps via preapplied 3M automotive tape.

Each kit includes 5′ of wire and scotch lock clips for easy wiring into your daytime running lamps or low-beam light assembly.

Made in the USA and also available in black.

Putco 290150T
Putco 290150T

Though this is not a paid review, this content has been produced by The AAM Group™ in support of manufacturers with whom it has a business relationship.